 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 450 MHz CDMA 3.4V/29.5dBm Linear Power Amplifier Module FEATURES AWT6136 Data Sheet - Rev 2.0 * * * * * * * * * InGaP HBT Technology High Efficiency 37% CDMA Low Receive Band Noise (NRX) -132 dBm/Hz @ 10 MHz offset Low Leakage Current (<5 A) SMT Module Package 50 Input and Output Matching Shut Down and Mode Control CDMA 2000 1XRTT Compliant RoHS Compliant Package 250 oC MSL-3 AWT6136 APPLICATIONS * CDMA/EVDO 450 MHz Wireless Handsets and Data Devices M5 Package 7 Pin 6 mm x 6 mm x 1.5 mm Surface Mount Module PRODUCT DESCRIPTION The AWT6136 is a high power, high efficiency amplifier module for CDMA wireless handset applications. The device is manufactured on an advanced InGaP HBT MMIC technology offering state-of-the-art reliability, temperature stability and ruggedness. A low power mode is available to reduce power drain on the system battery. The 6 mm x 6 mm x 1.5 mm laminate package is self contained, incorporating 50 input and output matching networks optimized for output power, linearity, and efficiency. GND at slug (pad) VCC 1 7 GND RFIN 2 Bias Control 6 RFOUT VREF 3 4 5 V MODE Figure 1: Block Diagram 10/2008 VCC AWT6136 GND VCC 1 2 7 6 4 VMODE 5 GND RFIN VREF RFOUT VCC 3 Figure 2: Pinout (X-ray Top View) Table 1: Pin Description PIN 1 2 3 4 5 6 7 NAME VCC RFIN VREF VMODE VCC RFOUT GND DESCRIPTION Supply Voltage RF Input Signal Reference Voltage Mode Control Supply Voltage RF Output Ground 2 Data Sheet - Rev 2.0 10/2008 AWT6136 ELECTRICAL CHARACTERISTICS Table 2: Absolute Minimum and Maximum Ratings PARAMETER Supply Voltage (VCC ) Mode Control Voltage (VMODE) Reference Voltage (VREF) RF Input Power (PIN) Storage Temperature (TSTG) MIN 0 0 0 -40 MAX +5 +3.4 +3.4 +10 +150 UNIT V V V dBm C Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. Table 3: Operating Ranges PARAMETER Operating Frequency (f) Supply Voltage (VCC) Reference Voltage (VREF) Mode Control Voltage (VMODE) RF Output Power (POUT) Case Temperature (TC) MIN 450 +3.2 +2.80 0 +2.5 0 +29.0 (1) -10 TYP +3.4 +2.90 +2.90 +29.5 MAX 460 +4.2 +3.1 +0.5 +3.1 +0.5 +90 UNIT MHz V V V dBm o COMMENTS PA"on" PA"shut down" Low Bias Mode High Bias Mode CDMA, VCC =+3.4V C The device may be operated safely over these conditions; however, parametric performance is guaranteed only over the conditions defined in the electrical specifications. Notes: (1) For operation at Vcc = +3.2 V and TC = +90 OC, POUT is derated by 0.5 dB. Data Sheet - Rev 2.0 10/2008 3 AWT6136 Table 4: Electrical Specifications - CDMA Operation (TC = +25 OC, VCC = +3.4 V, VREF = +2.90 V, 50 system) PARAMETER Gain Gain Variation Adjacent Channel Power at 885 kHz offset (1) Primary Channel BW = 1.23 MHZ Adjacent Channel BW = 30 kHz Adjacent Channel Power at 1.98 MHz offset (1) Primary Channel BW = 1.23 MHZ Adjacent Channel BW = 30 kHz Power-Added Efficiency (1), (2) Quiescent Current (Icq) Reference Current Mode Control Current Leakage Current Noise in Receive Band Harmonics 2fo 3fo, 4fo Input Impedance Spurious Output Level (all spurious outputs) Load mismatch stress with no permanent degradation or failure MIN 26 25 TYP 28.5 27.5 0.4 MAX 30 29 1.0 UNIT dB dB COMMENTS POUT = +29.5 dBm, VMODE = 0 V POUT = +16 dBm, VMODE = +2.90 V - -50 -58 -47 -47 dB POUT = +29.5 dBm, VMODE = 0 V POUT = +16 dBm, VMODE = +2.90 V 33 6 - -62 -68 37 7 60 6.5 0.8 <1 -132 -36 -44 - -59 -59 75 9 1.0 5 -130 -30 -35 2:1 dB % mA mA mA A dBm/Hz dBc VSWR POUT = +29.5 dBm, VMODE = 0 V POUT = +16 dBm, VMODE = +2.90 V POUT = +29.5 dBm, VMODE = 0 V POUT = +16 dBm, VMODE = +2.90 V through VCC pins, VMODE = +2.90 V through VREF pin, PA "on" through VMODE pin, VMODE = +2.90 V VCC = +4.2 V, VREF = 0 V, VMODE = 0 V fO +10 MHz, POUT < +29.5 dBm POUT < +29.5 dBm - - -70 dBc POUT < +29.5 dBm In-band Load VSWR < 5:1 Out-of-band Load VSWR < 10:1 Applies over all operating ranges Applies over all operating ranges 10:1 - - VSWR Notes: (1) POUT is derated by 0.5 dB for IS-98 / CDMA 2000 operation. (2) Efficiency spec applies at 455 MHz. 4 Data Sheet - Rev 2.0 10/2008 AWT6136 APPLICATION INFORMATION To ensure proper performance, refer to all related Application Notes on the ANADIGICS web site: http://www.anadigics.com Shutdown Mode The power amplifier may be placed in a shutdown mode by applying logic low levels (see Operating Ranges table) to both the VREF and VMODE voltages. High Bias Mode The power amplifier may be placed in a high bias mode by applying a logic low level (see Operating Ranges table) to the VMODE voltage. VCC GND at slug (pad) 1 7 GND 4.7uF (ceramic) RF Input (50 Ohms) 2 Bias Control 3 0.1uF VMODE (50 Ohms) 6 RF Out VREF VCC 4 5 4.7uF 4.7uF (ceramic) Figure 3: Application Circuit Schematic Data Sheet - Rev 2.0 10/2008 5 AWT6136 PACKAGE OUTLINE Figure 4: M5 Package Outline - 7 Pin 6 mm x 6 mm x 1.5 mm Surface Mount Module (Low Band ) 6136 6136 INK MARKED Figure 5: Branding Specification 6 Data Sheet - Rev 2.0 10/2008 AWT6136 6136R 6136R INK MARKED Figure 6: RoHS Compliant Branding Specification Data Sheet - Rev 2.0 10/2008 7 AWT6136 COMPONENT PACKAGING Dimensions in mm [in] Figure 6: Tape & Reel Packaging Table 5: Tape & Reel Dimensions PACKAGE TYPE 6 x 6 x 1.5 mm TAPE WIDTH 12mm POCKET PITCH 8mm REEL CAPACITY 2500 MAX REEL DIA 13" 8 Data Sheet - Rev 2.0 10/2008 AWT6136 ORDERING INFORMATION ORDER NUMBER TEMPERATURE RANGE PACKAGE DESCRIPTION RoHS Compliant 7 Pin 6 x 6 x 1.5 mm Surface Mount Module RoHS Compliant 7 Pin 6 mm x 6 mm x 1.5 mm Surface Mount Module COMPONENT PACKAGING AWT6136RM5P8 -10 oC to +90 oC Tape and Reel, 2500 pieces per Reel AWT6136RM5P9 -10 oC to +90 oC Partial Tape and Reel ANADIGICS, Inc. 141 Mount Bethel Road Warren, New Jersey 07059, U.S.A. Tel: +1 (908) 668-5000 Fax: +1 (908) 668-5132 URL: http://www.anadigics.com E-mail: Mktg@anadigics.com IMPORTANT NOTICE ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to change prior to a product's formal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. WARNING 9 Data Sheet - Rev 2.0 10/2008 |
Price & Availability of AWT613608
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |